ORP Analyzer MRP 66
This analyzer can measure ORP simultaneously from two sensors or it can measure ORP and pH. Two temperature measurements can be added. Sensors can be installed at one point or at different points up to 1,000-m distance from analyzer.
The analyzer can produce an arithmetical average of both measurements. The arithmetical average is converted to current signal to the third output and can be used as an input value of controller.
The analyzer contains one or two PID Controllers with width or frequency pulse output. Output can be unidirectional for solenoid valves or dosing pump control, and bi-directional for control drives with continuous movement. The analyzer can be also supplied with closed loop control 0(4) - 20 mA.
The analyzer is supplied in version T for indoor installation and in version V for outdoor installation.
Analyzer Specifications
Measurement Range | ORP -1000mV to +1000mV |
---|---|
pH 0,00 to 14,00 | |
Temperature -5 to 105°C | |
Sub Ranges (Analogue Output) | ORP ±1000mV,±500mV,±200mV, or other |
pH 0,0 - 14,0; 0,0 - 10,0 |
|
2,0 - 12,0 4,0 - 14,0 | |
2,0 - 7,0 4,0 - 9,0 | |
7,0 - 12,0 or other | |
Temperature 0 to 50°C, 0 to 100°C, or other | |
Display | 2-line alphanumeric LCD readout |
16 digits per line | |
Output | 1 up to 4 outputs 0(4) ... 20 mA |
Load | max. 500 Ohm |
Temperature Compensation -pH | automatic in range -5 to 105°C |
Basic Accuracy - ORP | ± 0,5% of the range |
Basic Accuracy - pH | ± 0,5% of the range |
Basic Accuracy - Temperature | ± 0,3°C |
Relay Outputs | none, 2 or 4 relays (high/low) |
(set points, hysteresis, delay - programmable) | |
voltage free contact, 250 V/50 Hz - max. 3 A | |
24 Vss - max. 0,5 A | |
Time Delay | 0,1 to 240 minutes |
Controller | 2x single-parameter PID controller with |
analogue or pulse output | |
Voltage Protection | built-in lightning protection circuitry |
Automatic Sensor Cleaning | adjustable frequency in range |
of 1 minutes to 24 hours | |
Enclosure | IP 65 |
Power | max. 20 VA |
Dimension | W 219 x H 184 x D 115 mm |
Weight | cca 1,5 kg |
Ambient Conditions
Temperature | 0 to +35°C/-20 to +35°C - version T/version V |
---|---|
Barometric Pressure | 600 to 1060 hPa |
Relative Humidity | 10 ... 90% |
* Valid for resistance load