Chlorine Dioxide Analyzer MPC 66D

The analyzer can measure chlorine dioxide concentration with one or two CSDT 43 sensors or chlorine dioxide and pH value simultaneously. Sensors can be installed at one point or at 2 different points up to 1,000 m from the analyzer.

Analyzer Specifications

Measurement Range – Chlorine Dioxide	0,01 to 5,00 mg/l
Sub Ranges (Analogue Output)	0,5 1,0 2,0 5,0 mg/l, or other
Measurement Range – pH	0,0 ... 14,0 pH units
Sub Ranges (Analogue Output)	0,0 ... 14,0 0,0 ... 10,0 2,0 ... 12,0 4,0 ... 14
Sub Ranges (Analogue Output)	2,0 ... 7,0 4,0 ... 9,0 7,0 ... 12,0 or other
Display	2-line alphanumeric LCD s readout
Display	16 digits per line
Output Signal	0(4) ... 20 mA
Load	max. 500 Ohm
Temperature Compensation	automatic (both values) of the range 1 to 40 °C
Basic Accuracy - Chlorine Dioxide	±5% of the range at constant temperature (±1°C)
Basic Accuracy - pH	±0,5% of the range
Relay Outputs	none, 2 or 4 relays (high/low)
	(set points, hysteresis, delay - programmable)
	voltage free contact, 250 V/50 Hz - max. 3 A
	*24 Vss - max. 0,5 A
Time Delay	0,0 to 240 minutes
Recommended pH Sensor	SEOJ 13
Enclosure	IP 65
Supply Voltage	230 V +6% ... -15%, 50/60 Hz
Power	max. 20 VA
Dimension	219x184x115 mm
Weight	cca 1,5 kg

Ambient Conditions

Temperature	0 to +35°C
Relative Humidity	10 to 90%
Barometric Pressure	600 to 1060 hPa

Files to download:

Dimensions (41.2 KB)
Electrical connections 1 (181.6 KB)
Electrical connections 2 (154.2 KB)

On – line instruments