SVK 42 Insertion Probe
The probe is installed into the pipe or onto the reservoir wall. It is fixed by a cap nut with a thread of G 5/4" into the welded-on piece. The welded-on piece is of the same material as the pipe or reservoir and is not within the scope of supply. On installation into the pipe it is suitable to place the probe in the bypass with the closing valves, which enables the removal of the probe during operation, (cleaning, calibration).
The 1.5 m probe cable is connected to a PK 41 junction box, containing an input unit of the appropriate analyzer. The PK 41 junction box can be fixed onto the wall or on the pipe (O.D. 25 to 50 mm - i.e. on railing) by MUT 12 clamp.
Dimensions in m.
Specifications
| Medium Temperature | *max. 100°C |
|---|---|
| Materials in Contact with the Measured Medium | silicone rubber, stainless steel |
| Pressure | max. 0,6 MPa |
| Sensor Dimensions | Ø12(15) mm x 115 mm |
| PK 41 Junction Box Dimensions | 120 x 160 x 90 mm |
| Weight | ca 0,8 kg |
| PK 41 Enclosure | IP 66 |
Temperature and pressure of measured medium are also determined by sensor used.
Files to download:
SVK 42 Probe – dimensions (124.9 KB)
Print
