Conductivity analyzer MSV 66
The MSV 66 analyzer is a dual channel apparatus. It can measure conductivity twice and temperature twice simultaneously. The sensor can be placed at one point or at 2 different points up to 1,000-m distance from the analyzer. The analyzer can calculate an arithmetical average of both measurements. The analyzer can contain 2 PID controllers which can be configured as analogue or pulse.
The analyzer can convert measured conductivity to conductivity that should be measured at a temperature of 25 °C. The temperature dependence constant can be set or also obtained from measurement at 2 different temperatures. The analyzer calculates the constant.
Semiautomatic calibration can be made through a standard solution or by setting the actual conductivity that is measured by an external meter.
The analyzer is supplied in version T for indoor installation and in version V for outdoor installation.
Measurement Range (Display) | Conductivity | 0,2 to 20, 2 to 200, 20 to 2 000 mS/cm |
---|---|---|
0,2 to 20, 2 to 200 mS/cm | ||
Temperature | 0 to 100°C | |
Sub Ranges (Analogue Output) | Conductivity | 5, 10, 20, 50, 100, 200, 500 mS/cm |
1, 2, 5, 10, 20, 50, 100, 200 mS/cm, or other | ||
Temperature | 0 to 50°C, 0 to 100°C, or other | |
Display | 2-line alphanumeric LCD readout | |
16 digits per line | ||
Output | 1 up to 4 outputs 0(4) to 20 mA | |
Load | max. 500 Ohm | |
Temperature Compensation | automatic in range 1 to 100 °C | |
Coefficient of Temperature Dependence | 0 to 5%/°C | |
Basic Accuracy - Conductivity | ±1% in range | |
Basic Accuracy - Temperature | ±0,3°C | |
Relay Outputs | none, 2 or 4 relays (high/low) | |
(set points, hysteresis, delay - programmable) | ||
voltage free contact, 250 V/50 Hz - max. 3 A | ||
*24 Vss - max. 0,5 A | ||
Time Delay | 0,0 ... 240 minutes | |
Controller | 2 x single-parameter PID controller | |
with analogue or pulse output | ||
Voltage Protection | built-in lightning protection circuitry | |
Automatic Sensor Cleaning | adjustable frequency in range | |
of 1 minutes to 24 hours. | ||
Enclosure | IP 65 | |
Supply Voltage | 230 V +6% ... -15%, 50/60 Hz | |
Power | max. 20 VA | |
Dimension | 219x184x115 mm | |
Weight | cca 1,5 kg |
Ambient Conditions
Temperature | 0 to +35°C/-20 to +35°C - version T/ version V |
---|---|
Input Unit | -20 to +70°C |
Relative Humidity | 10 to 90% |
Barometric Pressure | 600 ... 1060 hPa |
Files to download: