MFD 66 Multimet
Specifications
Measurement Range
|
Conductivity 2 to 20 000 uS/cm | |
---|---|---|
pH 0,00 to 14,00 | ||
ORP ±1000 mV | ||
ISE ±1000 mV | ||
O2 concentration 0,1 to 30,0 mg/l | ||
O2 saturation 1 to 200 % | ||
Temperature T1 -5,0 to 105,0°C | ||
Temperature T3 -O2 -4,0 to 40,0 °C | ||
Display
|
2-line alphanumeric LCD, 16 digits per line | |
Serial Output
|
RS 232 | |
Sensor pH, ORP, ISE
|
BNC connector | |
Temperature Compensation - pH
|
automatic | |
Input Resistance (pH, ORP, ISE Inputs)
|
1.1012 Ohm | |
Input Current (pH, ORP, ISE Inputs)
|
3.10-12 A | |
Basic Accuracy - ORP, ISE
|
±1 mV | |
Basic Accuracy -pH
|
±0,02 of pH unit | |
Sensor for Temperature Measurement (T1)
|
TNiK 115 | |
Basic Accuracy - Temperature T1
|
±0,2 °C | |
Sensor - Oxygen Measurement
|
CSOT 43 | |
Temperature Compensation - Oxygen
|
automatic in range -4,0 to 40,0 °C | |
Salinity Correction - Oxygen
|
automatic | |
Barometric Pressure Compensation - Oxygen
|
automatic in range 500 to 1200 hPa | |
Basic Accuracy - Oxygen
|
±1% of the range | |
Basic Accuracy - Temperature (T3-oxygen)
|
±0,2°C in range 0 to 40°C | |
Additional Error at Temperature Change of Measured Medium - Oxygen
|
±3% of the range at temperature t = 20°C±15°C | |
Sensor for Conductivity Measurement
|
CE 212, CE 212B | |
Temperature Compensation - Conductivity
|
automatic in range 0 to 100°C | |
Temperature Coefficient - Conductivity
|
adjustable in range 0,0 to 15,0%/°C | |
Basic Accuracy - Conductivity
|
±2% of the range ( to 10,0 mS/cm ) | |
Enclosure
|
IP 00 | |
Power
|
max. 0,2 VA | |
Dimensions
|
152x70x145 mm ( W x H x D) | |
Weight
|
ca 1,5 kg |