Electrodes for pH Measurement
Glass electrodes are used almost exclusively for pH measurement. Their quality has significantly increased in the last few years, in particular their mechanical resistance, stability and lifetime.
Unless otherwise stated, they have a diameter of 12mm and length of 115 mm, electrodes are terminated by a low noise coaxial cable as standard (length 0.8-1m) and BNC connector. Semi-micro version electrodes have a probe diameter of 6.5mm in the same pipe, 70mm long. The overall length is 145mm. Stab electrodes have a sensor shaped into a point. A semi-micro stab electrode is suitable for measurement of small sample volumes, 0.5 to1ml.
Single Electrodes - Half Cells
Description
|
Type | Temp. Range/°C | pH Range |
---|---|---|---|
With increased mechanical resistance:
|
|||
Standard
|
SEO 212
|
5°C - 105°C
|
0-13
|
Z14 ground glass joint
|
SEO 412
|
5°C - 105°C
|
0-13
|
Low temperature
|
SEN 212
|
-5°C - 50°C
|
0-11
|
Universal
|
SEU 212
|
10°C -105°C
|
0-14
|
Combination Electrodes - pH Cells:
Description
|
Type | Temp .Range/°C | pH Range |
---|---|---|---|
With increased mechanical resistance: | |||
Standard |
SEOJ 212
|
5°C - 105°C
|
0-13
|
NZ14 ground glass joint |
SEOJ 412
|
5°C - 105°C
|
0-13
|
Plastic case, jelly reference electrolyte, without filling opening |
SEOJ 612G
|
5°C - 60°C
|
0-13
|
Low temperature |
SENJ 212
|
-5°C - 50°C
|
0-11
|
Universal |
SEUJ 212
|
10°C -105°C
|
0-14
|
Stab |
SEOJ 222
|
5°C - 90°C
|
0-13
|
Semimikro, for general use, sensor diameter 6.5mm, length 70mm
Description | Type | Temp .Range/°C | pH Range |
---|---|---|---|
SEOJ 252
|
5°C - 90°C
|
0-13
|
Semimikro, stab, sensor diameter 6,5mm, length 70mm
Description
|
Type | Temp .Range/°C | pH Range |
---|---|---|---|
Standart
|
SEOJ 242
|
5°C - 90°C
|
0-13
|
Double bridge
|
SEOJ 262
|
5°C - 90°C
|
0-13
|
With increased mechanical resistance, built – in temperature sensor - Ni 2 kOhm
Description
|
Type | Temp .Range/°C | pH Range |
---|---|---|---|
SEOJ 292
|
5°C - 105°C
|
0-13
|