MFD 66 Multimet
Specifications
Measurement Range
|
Conductivity 2 to 20 000 uS/cm |
---|---|
pH 0,00 to 14,00 | |
ORP ±1000 mV | |
ISE ±1000 mV | |
O2 concentration 0,1 to 30,0 mg/l | |
O2 saturation 1 to 200 % | |
Temperature T1 -5,0 to 105,0°C | |
Temperature T3 - O2 -4,0 to 40,0 °C | |
Display
|
2-line alphanumeric LCD, 16 digits per line |
Serial Output
|
RS 232 |
Sensor pH, ORP, ISE
|
BNC connector |
Temperature Compensation - pH
|
automatic |
Input Resistance (pH, ORP, ISE Inputs)
|
1.1012 Ohm |
Input Current (pH, ORP, ISE Inputs)
|
3.10-12 A |
Basic Accuracy - ORP, ISE
|
±1 mV |
Basic Accuracy -pH
|
±0,02 of pH unit |
Sensor for Temperature Measurement (T1)
|
TNiK 115 |
Basic Accuracy - Temperature T1
|
±0,2 °C |
Sensor - Oxygen Measurement
|
CSOT 43 |
Temperature Compensation - Oxygen
|
automatic in range -4,0 to 40,0 °C |
Salinity Correction - Oxygen
|
automatic |
Barometric Pressure Compensation - Oxygen
|
automatic in range 500 to 1200 hPa |
Basic Accuracy - Oxygen
|
±1% of the range |
Basic Accuracy - Temperature (T3-oxygen)
|
±0,2°C in range 0 to 40°C |
Additional Error at Temperature Change of
|
±3% of the range at temperature t = 20°C±15°C |
Measured Medium - Oxygen
|
|
Sensor for Conductivity Measurement
|
CE 212, CE 212B |
Temperature Compensation - Conductivity
|
automatic in range 0 to 100°C |
Temperature Coefficient - Conductivity
|
adjustable in range 0,0 to 15,0%/°C |
Basic Accuracy - Conductivity
|
±2% of the range ( to 10,0 mS/cm ) |
Enclosure
|
IP 00 |
Power
|
max. 0,2 VA |
Dimensions
|
152x70x145 mm ( W x H x D) |
Weight
|
ca 1,5 kg |